Smart Controller | Adding Blinds And Rooms

Adding blinds and rooms
Adding blinds using NEOV1 Setup code (Neo Blinds)
Important: NEOV1 setup code is exclusively for Neo motors. First, you need to set NEOV1 as your setup code (pictures below): -Open the Menu on your top left -Settings -Change setup code -Select NEOV1 and save it Add your blinds now: (pictures below): ...
Adding a Blind using SBH20 Setup Code
Take the time to decide how you want to map your physical house into rooms in the app to make automation and voice commands (to integrated voice assistants) easy and practical. For more information, see our Tips for grouping blinds to match your home ...
Tips for grouping blinds to match your home layout
Blinds from different brands, RF protocols or with different features cannot always be added to the same room, especially if they require different handheld remote controls. If, when adding a blind, the room you want to select does not appear, the ...
Adding a Blind
If you encounter issues during the Add Blind process, please refer to this troubleshooting article for detailed guidance. Take your time to decide how you want to map your physical house into rooms in the app to make automation and voice commands (to ...

Popular Articles
Home Assistant/Hassio Integration
Custom component and instructions for Home Assistant can be found in this link Home Assistant Custom Component And attached are the files with instructions for direct local TCP/IP and HTTP/IP integration.
Smart Controller C-BR300: Shows offline in the app
First, ensure it is connected to a wall charger and has power, then check if the light located on the back of the Smart Controller is on. Wi-Fi Security Compatibility Notice Smart Controllers model C-BR300 no longer support WPA-PSK Wi-Fi security due ...
Apple Home Integration via Matter
Smart Controller models WC100 and C-R200 aren't compatible with Matter due to differences in design and capabilities. The QR Code on the bottom of the Smart Controller is not the Matter QR Code. Please follow the instructions below to locate your ...
Blind show as “Not Found”
There are four possible causes for this: You may not be in range of the blinds. In this case you just need to move towards to the blinds until you are in range and the app show the option Tap to Connect. The blind may not be powered. If it’s a ...
Alexa voice commands
Use "open" and "close" commands to control your devices. They can be used either with room names from the Neo Smart Blinds app or groups that you have created in the Alexa app with rooms assigned. Commands “turn on” and “turn off” are still supported ...

Smart Controller | Adding Blinds And Rooms | Knowledge Base