C-R200 and WC100: Note to Android owners

After connecting to the hotspot, you should wait about 10 seconds before returning to the app. Your phone may notify you that this access point does not have Internet access, and ask you whether you want to remain connected. You should confirm that you do before pressing “Next” in step 3. Otherwise you will see an error message in the app.

• Related Articles

• C-R200 and WC100: Note to Samsung Galaxy Note 8 owners

  Follow the in-app troubleshooting steps. If you still can’t connect to the hotspot, please try the alternative method below. Access the alternative method page Using your phone, tap on this link. Following the steps on the page to connect the Smart ...

• Adding a Smart Controller: Model C-BR300

  Information and what you will need Besides the system requirements listed below, the app will also need your input on whether you want or not to share the device approximate location. You can't use our Web app to add a Smart Controller model C-BR300. ...

• Adding a Smart Controller: Models WC100 and C-R200

  Information and what you will need Besides the system requirements listed below, the app will also need your input on whether you want or not to share the device approximate location. You will need: 2.4Ghz Wi-Fi with Internet Your Wi-Fi password in ...

• Smart Controller- C-BR300 Model: Issues When Adding to the Account

  The Smart Controller C-BR300 may struggle to go through the initial setup and internet connection with some recent models of Wi-Fi routers and modems. We are working to improve compatibility to such devices. Meanwhile, please follow the ...

• Smart Controller shows offline in the app

  Various things could cause your Smart Controller to stop working normally. First, ensure it is connected to a wall charger and has power, then check if the light located on the back of the Smart Controller is on. Quick fix Press the "R" button on the ...