The remote control no longer works with one of my blinds
Possible reasons why a remote control may stop working with blinds it was previously paired to:
- Blind motor has no power: Make sure the blind’s battery is charged.
- Remote control battery is low: A weak battery can cause some commands to fail. Test if the issue happens only with one blind or randomly. If random, replace the remote batteries and test again.
- Blind or remote lost pairing: The blind’s memory may have been cleared, or the remote channel was unpaired. Pair the remote to the blind again.
For remote control instructions, refer to the article for your remote control’s model series, which is printed on the back of the remote.
Related Articles
WS-208: Wall-Mounting the Remote Control
Place the wall remote control on a flat surface, facing you. Locate the notch at the bottom. Turn the wall remote control so the back plate is facing you. Using a flathead screwdriver, insert it into the notch. Hold the wall remote control with one ...
WS-200 series Wall Remote Controls
WS-202 Wall Remote Control Compatible motors: All Neo motors, except TM-WB Radio specification: ASK 433.92MHz, 10dBm Number of channels: 2 Battery model: CR2032x1PC Models WS-202-W PDF Instructions Download Instructions - English Télécharger les ...
RC-100 series Handheld Remote Controls
RC-102 and RC-106 Handheld Remote Controls Compatible motors: All Neo motors, except TM-WB Radio specification: ASK 433.92MHz, 10dBm Number of channels: 2 and 6 Battery model: CR2032x1PC Models RC-102-W RC-106-W Instructions Download Instructions - ...
RC-200 series Handheld Remote Controls
RC-201, RC-202 and RC-206 Handheld Remote Controls Compatible motors: All Neo motors, except TM-WB Radio specification: ASK 433.92MHz, 10dBm Number of channels: 1, 2 and 6 Battery model: CR2450x1PC Models RC-201-W, RC-201-B RC-202-W, RC-201-B ...