How do I Enable the Bluetooth in an Apple Device?

How do I Enable the Bluetooth in an Apple Device?

Below is the general guide to enable the Bluetooth in your Apple device. If this doesn’t work, please see your phone's manual or Apple’s support site.

Enabling the Bluetooth via home screen:

  1. Swipe up from the bottom of your screen to fully expand the control centre
  2. Tap on the Bluetooth symbol to enable it (the icon will be blue)
How to enable the Bluetooth in an Apple device

Enabling the Bluetooth via settings:

  1. Tap on Settings
  2. Look for Bluetooth or the Bluetooth symbol in your settings and tap it
  3. Tap or swipe the switch so it will be in the "on" position
How to enable the Bluetooth in an Apple device

    • Related Articles

    • How do I enable the Bluetooth in an Android Device?

      Each Android device may vary, below is the general guide to enable the Bluetooth. If this doesn’t work, please see your phone's manual or support site. Enabling the Bluetooth via home screen: Swipe down from the top of your screen to fully expand ...

    • The App Doesn’t Show any Blind to Pair, Even Though the Blue Link is Connected to my Blind.

      Make sure you close enough to the blind and that the Bluetooth in your device is not turned off, you just need to turn it on. If you need help to enable the Bluetooth in your device, please check the links below. Enable the Bluetooth in an Android ...

    • One or More Blinds are “Not Found”. What Should I Do?

      There are three possible causes for this: You may not be in range of the blinds. In this case you just need to move towards to the blinds until you are in range and the app show the option Tap to Connect. The blind may be in use by another person in ...

    • Sometimes the Blind Takes Too Long to Connect to the App. What Should I Do?

      Bluetooth implementation differs significantly from device to device. This can cause inconsistent connection times depending on your phone or tablet. After 10 seconds, if the blind is not connected, return to the blind list and try again.

    • Blue Link Setup

      For each motorized blind, add the Neo Blue Link to the motor using the Neo Blue Link connector. You may need to use a chair or a ladder to be able to reach connection wire. If that is the case, you should remain on the chair/ladder until the end of ...