Controls and Features in Matter-Enabled Apps
The Neo Smart Blinds app adjusts control options to match a blind's motor features, enhancing automation flexibility. However, integration with platforms like the Home and SmartThings apps depends on the control options these apps provide. This article explains the limitations and some new hidden features to better bridge the Neo Smart Blinds App to Home and SmartThings apps.
Available Commands
Home App
Open, Close, Percentage Position* (if supported by motor).
Open, Close, Percentage Position* (if supported by motor).
SmartThings App
Open, Close, Stop, Percentage Position* (if supported by motor), and Preset Position (set using SmartThings settings).
Open, Close, Stop, Percentage Position* (if supported by motor), and Preset Position (set using SmartThings settings).
*The blind will respond to percentage commands only if the motor supports this feature. If the % button appears on the blind card in the Neo Smart Blinds app and the blind reacts to its commands, the motor supports this functionality.
Current Blind Position
Home and SmartThings Apps
It will match the last command sent through the Smart Controller. Note that this may differ from the actual blind position if the blind received commands from other sources, such as manual operations, remote controls or separate Bluetooth apps.
It will match the last command sent through the Smart Controller. Note that this may differ from the actual blind position if the blind received commands from other sources, such as manual operations, remote controls or separate Bluetooth apps.
Functional Details for Blinds Without Percentage Position Support
To enhance your experience and expand automation possibilities, we introduced a feature that converts percentage values into equivalent blind controls within the Neo Smart Blinds app.
By mapping specific ranges to the corresponding features of the blind, the Smart Controller ensures smooth operation and expanded functionality, even with motors with limited protocol capabilities.
Related Articles
Matter Integration
Matter integration is here! We’re excited to announce that Matter integration is now available for Smart Controllers C-BR300 with serial numbers starting with "SR" and the Neo Smart Blinds app version 5.2.0 or later. For full details on ...Apple Home Integration via Matter
Smart Controller models WC100 and C-R200 aren't compatible with Matter due to differences in design and capabilities. The QR Code on the bottom of the Smart Controller is not the Matter QR Code. Please follow the instructions below to locate your ...Samsung SmartThings Integration via Matter
Smart Controller models WC100 and C-R200 aren't compatible with Matter due to differences in design and capabilities. The QR Code on the bottom of the Smart Controller is not the Matter QR Code. Please follow the instructions below to locate your ...Matter Integration Troubleshooting
The Smart Controller is not appearing as a nearby accessory Ensure your Smart Controller is powered on, connected to the internet, and that your device is connected to the Wi-Fi with the same SSID name as the Smart Controller. For more information, ...How to connect to Google Assistant
You will need the Google Home app and a Google Assistant enabled device (speaker or phone). Tap on "Add" Open the Google Home app, then tap on the plus button. If you have multiple Google accounts, make sure you are using the one linked to your ...